Based upon a previous design for a Raspberry Pi 4 (see here), this is another two part enclosure/case now sized for a Jetson Nano dev kit, incorporating a mounting for a cooling fan - with an additional separate fixing bracket for a custom PCB that controls the fan which is the same as is used for the Pi case but has been repeated here for completeness.
6mm M2 self-tapping screws are used to secure the Jetson Nano assembly into the case base and 8mm M3 pan head screws are used to connect the case lid to the case base. The screws/nuts supplied with the fan are used to secure it to the mounting on the case base.
Self adhesive feet are used to raise the case above the surface to allow cool air to flow in from beneath the case.
More detail on the usage context is available from this link.
All the components use 1.75mm PLA and a layer height of 0.15mm with print details for each component produced on an i3 Mk3 shown in the table below.
component file name/description | brim (mm) | support | filament length (m) | print time (i3 Mk3) |
nano_case_btm03.stl: case base with integrated fan bracket | 5 | support box for SD card opening | 15.02 | 4h 56m |
nano_case_lid03_roty180_repaired.stl: case lid | none | support boxes for the corners | 21.66 | 8h 8m |
fan_PCB_holder04.stl: mounting bracket for a custom PCB that controls a fan | 7 | none | 0.88 | 30m |
The author marked this model as their own original creation.