Binder Clip Clamp (Updated)

Using a binder clip you can add these to the clip in order to hold objects better than just using the clip.
These are used to hold paper to a stencil or to glue items together where you need a tight clamp.

There are two sizes of clamps here. The 33mm is the width of the binder clip that I used while the 100mm adds more stability. I removed the 19mm Clamps that I just added as they needed some more work.

Update: I've added a clamp that has a 20 degree angle to it. Due to the fact that the binder clip has a small radius, that when clamping thicker material only the corner of the clamp was making contact to the material. This led to poorer performance as well as creasing of the material as too much pressure was being asserted in the small area.

I printed these in both TPU and PETG. I wanted the TPU 33mm around in the event that I needed to bind something and that it would give a bit more and not scratch the object. Whether the prevention of scratching is necessary is another thought. LOL