@DrewDeeDoo For me its jet engine fan on the prinhead, easily 50db. Note that Im using Kobra 2 Neo, and I cant really hear power supply when printhead is on 100%. I wish this mod of yours would evolve into nice printhead enclosure to protect the cables around, atleast in minimal way. Im kinda stressed about enlarging hole in the cooling part, wish I could print that part so I could leave an option to get back on stock setup.
@Lothum_1641718 Drilling the hole larger wouldn't prevent going back to stock but I understand. Also you can remove the lower alignment peg in your slicer and use without it. I probably won't add a cover as Anycubic has been a pain in the ass to me and I don't want to support their products anymore :p.
@DrewDeeDoo Too bad, because Kobra 2 neo is the only printer I've got right now, and this is the only printhead mod for this series I've found! Thanks for the model, I will try it when I will finally make perfect petg profile!
@DrewDeeDoo Thank you! Now Im sure Im gonna print it! :D I wonder if it would be possible to put a quieter fan in there, or maybe two? Thank you again for your commitment!
I really like this project,
I wanted to ask you, is the fan quieter without the shroud?
@Lothum_1641718 No unfortunately. No impact on sound only convenience.
I find the power supply fan is louder than the parts cooling fan. I would fix that first :)
https://www.printables.com/model/703943-anycubic-kobra-2-fan (edited)
@DrewDeeDoo For me its jet engine fan on the prinhead, easily 50db.
Note that Im using Kobra 2 Neo, and I cant really hear power supply when printhead is on 100%.
I wish this mod of yours would evolve into nice printhead enclosure to protect the cables around, atleast in minimal way.
Im kinda stressed about enlarging hole in the cooling part, wish I could print that part so I could leave an option to get back on stock setup.
@Lothum_1641718 Drilling the hole larger wouldn't prevent going back to stock but I understand. Also you can remove the lower alignment peg in your slicer and use without it. I probably won't add a cover as Anycubic has been a pain in the ass to me and I don't want to support their products anymore :p.
@DrewDeeDoo Too bad, because Kobra 2 neo is the only printer I've got right now, and this is the only printhead mod for this series I've found!
Thanks for the model, I will try it when I will finally make perfect petg profile!
@Lothum_1641718 I updated the design so you don't have to drill anything now
@DrewDeeDoo Thank you! Now Im sure Im gonna print it! :D
I wonder if it would be possible to put a quieter fan in there, or maybe two?
Thank you again for your commitment!