This is a simple mounting for a Wyze Cam OG to be able to mount to the top of the front glass door of a Bambu P1S/X1C printer. I've added a shroud to shield out the external lights to avoid reflections off the glass.
The door should still be able to open fully if you run the wire to the left corner.
Print the clip on the side with a tiny support. The mount itself should not need any support.
Use a piece of 1.75mm filament to join the mount and the clip together after printing.
NOTE: The one in the photo had the legs a bit long, but I didn't want to reprint to waste filament. The STL should have the proper length.(49mm)
The author marked this model as their own original creation.