Modular Filament Storage/Organiser (side by side)

This filament holder has indents so you can print as many as you want and easily click them to store them side by side.

Recommended Print Settings

• Supports: No
• Infill: 10% gyroid/triangle
• Material: PLA (any other material will also be fine)

Dimensions

The dimensions are 205mm x 77.5mm x 165mm. This should allow for storage of most types and sizes of 1kg filament rolls/spools. It also has enough room if you want to store the filament in an air tight bag.

Design

This is one of the first things that I have designed.

I have also posted this on Thingiverse which you can find at: https://www.thingiverse.com/thing:6382617. I have also posted this on AnkerMake Make It Real, which you can find here: https://makeitreal.ankermake.com/models/3f3ab9c5e2ef11eea7702e86670cc925/.

Please let me know if you have any ideas on how to improve this or how you found it to print.

Happy printing!