Nomad - RC Car / Truggy

Let me introduce you to the almost indestructible RC Truggy – NOMAD.
Your funds support the creator's further activity.
$45
532
5
19 k
updated August 15, 2024

Description

Model scale 1:10
Four-wheel drive
Length: 43 cm
Wheelbase: 27,5 cm
Width: 30 cm
Track: 24 cm
Height: 15 cm
Weight: 2,7 Kg (With 2s 5200mah battery)
Dimensions of the battery tray: L 140mm*W 48mm*H 26mm

Let me introduce you to the almost indestructible RC Truggy – NOMAD.

The parts that are most prone to breaking are printed from flexible TPU material with a hardness of 98 A. This material is strong enough to keep its shape but at the same time soft enough to bend when needed (crash, hard bashing).

I used hsp parts for the drivetrain (good ratio of quality and price).

In terms of performance, I was surprised at what this baby is capable of.So you can literally do crazy things with it.

Keep in mind that if you do too many crazy things you will probably break something so be kind to your rc car.

For non-printed material you must count with price about 195 € to 235 €, it depends on actual price (without battery and transmitter kit). The list of non-printed material and assembly manual is inside folder with this model.

 

  • Update 12.2.2024

         Added option to choose between Full dogbone or CVD joint drivetrain.

  • Update 17.2.2024

         The attachment of the body to the chassis has changed.

  • Update 28.3.2024    
                                                                                                                    
    Optimization for TPU 95A hardness.
    Limiting the selection of CVD and Full dogbone as the basic setup, rear Full dogbone and front CVD with the option of full dogbone.
    Added option to 3d print wheels.
    Updated assembly manual, extra information for printing and list of non-printed material.
     
  • Update 23.6.2024

    Added stand
    Removing a couple of files that should no longer be there
    (some problem in the zip process - which has already been resolved, the program somehow mixed the old version with the new one and some files that should not have been there remained there)

  • Preview of non printed material

 

 

.STEP file of whole design are available inside folder for those who want modify it personally.

 

For better visualization of the model, you can check assembly video.
 

Skatepark bashing video.
 

I really hope that you will enjoy assembling and playing with this RC Car.

3D PRINTING SETTINGS

Recommended printer build volume: 220x220x200 mm
All parts are preoriented ( only .3mf files), support is needed only for few parts.
All parts are designed for easy printing.
Short information about print settings for parts is inside the folder.

Recommended material for printing: TPU shore 98 A or 95A and PET-G (or PLA)
TPU Flex shore 98 A : 0,7 KG (0.5 kg should be enough, but it is good to have some reserve)
PET-G : 1 KG
 

Tags



Model origin

The author marked this model as their own original creation.

License