EVA 3 Beacon3D Probe UHF / Volcano Duct

Mount for Beacon3D but corrected and adjusted
2h 24m
1× print file
0.20 mm
0.40 mm
20.00 g
13
48
0
528
updated December 10, 2023

Description

PDF

I found one model that was close to what I needed but lacking few things to be perfect.

 

When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido inserted so Z distance was not good.

 

Second thing there was no place to add M3S insert so I redesigned hole so Ruthex M3S (and compatible others) can be inserted and add additional material around hole so insert make good connection.

 

I wanted to add cable releaf but didn't want to disassemble EVA3 and I found simpler way to implement cable relief, you only need 5mm longer screw than original.

 

Distance from center of nozzle:

X= 0 mm

Y= 16.978 mm

Z = 2.6 mm (2.6 to 3 mm recommended, so closest to the bed)

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I found one model that was close to what I needed but lacking few things to be perfect.

 

When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido inserted so Z distance was not good.

 

Second thing there was no place to add M3S insert so I redesigned hole so Ruthex M3S (and compatible others) can be inserted and add additional material around hole so insert make good connection.

 

I wanted to add cable releaf but didn't want to disassemble EVA3 and I found simpler way to implement cable relief.

 

License