SPARKY: Dowel Holder

This model is designed to attach a ¼" diameter dowel and to the front of the SPARKY robot to meet the criteria for the Science Olympiad Robot Tour event.

Mounting holes are sized for M3x10mm screws & nuts. Spacing of holes for mounting is 20mm.

Additional Materials:

• ¼" wood dowel
• 2x M3x10mm screws
• 2x M3 nuts

Required tools: 

• 2.5mm hex driver and 5.5mm nut driver for M3 screws and nuts

Slicer Settings:

Models are printed on a Bambu X1C using PLA with 0.20mm layer height, “strength” settings, and no supports.

Part of the SPARKY open academic robotics platform.