HamThings Fuse Block Enclosure

This is an enclosure for the HamThings Powerpole Fuse Block. Print both files. Have the Fuse Block handy, along with the mini fuses you'd like to use with your application. 

Insert the Fuse Block. You may choose to hot glue it in place, but this is not required. Make sure not to get hot glue inside the fuse connectors or Powerpoles.

Apply a bit of glue to the top edge of the enclosure, then place the top. Insert the fuses into the Fuse Block (they will act as a bit of a clamp, along with locating the top). Optionally, you may also clamp the top for a few minutes.

You can buy your HamThings Fuse Block on Etsy!

______________________

Changelog:

V3.1:

• Rotated model to correct orientation

V3:

• CW Identifier and HamThings logo

V2:

• Original upload