Pixel Watch 2 / 3 Charging Stand simple

Adapted design by adding an inner ring that can be added in the slicer using the "Add part - Load.." function.
8
84
4
1263
updated August 26, 2024

Description

PDF

The adapter ring will NOT fit when printed separately (there are intended overlaps / the ring is too big alone). Load the main model ("pixel-watch-charger.stl") first - do not move the model! Then right-click it and select “Add part” then “Load..” and choose the "inner-adapter-ring".stl". Now you can move the model as requried.

After printing, the original charger cable should snap-fit in, depending on your printer's tolerances.

Print with the charger-slot on the print plate for easy support removal.

 

edit1: added missing base plate.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Added an inner ring adapter that needs to be added after loading the original model (pixel-watch-charger) as a “part” in PrusaSlicer.

License