Parkside PHPA 20-li A1 hot glue gun replacement part (1.5mm shorter, and more clearance)

Great original work, didnt fit with my shell, ( i assume they changed it). So i shortened it and gave it more clearance.
4
45
0
292
updated October 10, 2023

Description

PDF

Removed 1.5mm of material from the biggest post, it intervered with my case.

Enlarged the pinhole that connects to the bending arm. The original was a bit too tight (maybe due to my layer thickness).

Added more spacing for the pivot point.

I heat treated (anealed) it in the oven at 90C, now its rock solid.

Installation video (timestamped):

Special thanks to @ThomasLTboom for having this publicly available. Saved me some time modeling! Parkside, get your stuff together, great tools. Though lacks in small places.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Removed 1.5mm of material from the biggest post, it intervered with my case.

Enlarged the pinhole that connects to the bending arm. The original was a bit too tight (maybe due to my layer thickness).

Added more spacing for the pivot point.

License