DUMMY 13 Printable Jointed Figure (BETA FILES)

@LuisAlexandre_404081 ok

I broke a leg of the sensor.... twice, because the maintence i had to do related to the modification for my printer to print pet (edited)

it basically happens when the printer switch on the heater, and there is no increase in temperature on the respective sensor

@LuisAlexandre_404081 well it's gone now..

@MaximoJuarez_949127 yes, your thermistor might be failing

and have you ever gotten the error message hot end temp too low, i had an ender 3 and had to give it away for parts because it wouldnt work?

btw i did an animation with the dummy 13 if you wanna check it out https://www.youtube.com/watch?v=4q3qjzHN6zQ

@LuisAlexandre_404081 sure! if you print the joints in pla they will wear over time, but if you put a dot of superglue on each socket/ball spread it around until it covers the whole thing then let it dry they will last a lot longer. just make sure its not too thick and it is completely dry before you put it together again. Hope this helps!

@MaximoJuarez_949127

Changing subject:
i saw you commenting in other post to use superglue in the joins to strengthen then.
care to elaborate?

@MaximoJuarez_949127 and you could probably paint it like this too

@MaximoJuarez_949127 it's just one color that I kinda faded... I guess thats not a solid color😅

@LuisAlexandre_404081 it is a solid color!

@MaximoJuarez_949127 bad at painting? aheuhauhae
i can only do solid colors, and thats it

@LuisAlexandre_404081 it was actually easy and I'm a bad painter so it could probably look better. But I used a transparent paint and just started near the joints or places that would get dirty and spread it to get that wearing effect. It would probably work really well with a lucky 13

@MaximoJuarez_949127 man this is really sick!
I have no idea how you painted that

@MaximoJuarez_949127 it's a little vague but it's there a story about 1 year in the making...

@LuisAlexandre_404081 how did you get this... this is literally what I thought!

@MaximoJuarez_949127 they are clearly the next generation with an evil programming to take over the world. The lucky series lack the remote control switch and there are a threat to the plan

@LuisAlexandre_404081 good to know I'm not the only one who printed out a dummy 13 thought to pose them beating up the lucky 13 for no reason... (edited)