v2:
Update: Wahoo compatible model uploaded. To be tested since I only changed the orientation of the Garmin mount by 90°. Feedback appreciated!
Since there is only one crappy overpriced Garmin Edge mount from Rose that fits their Xlite aero bar I designed my own. I use the Edge 830 and haven't tested it with bigger models yet.
Weight with 20% infill: 16 g
Total weight with two M5 x 20 screws + washer: 25 g
Layer height: 0.20mm
Infill: 20 %
Wall loops: 4
I recommend printing it in the oriantation that I defined in the stl and use supports. This ensures a good quality fit of the mount.
The author marked this model as their own original creation.