THE 100 v1.1 - The fastest 3D printer based on a printed Frame

A hybrid between the100 and a 2012 solidoodle 2!

Hi Matt, love this project! I almost have mine done! Do you happen to have the step file for the rapido fan duct? I need to make a modification. Thank you in advance!

Very Fun Projekt. Print on a P1S.
Made it from an old I3 Mega S.
Thanks.

@MattThePrintingNerd I am currently in the first stage of assembling this. I bought the linear motion kit from Ali Express that you linked in the BOM. When trying to fit the bearings into the rod cradle they are always very loose. I followed the printer settings and it was printed on a Bambu P1S. Any suggestions? Do I just need to change some settings or will I need to change the dimensions of the model in CAD?

Printed all the parts on my super racers. Used up spool remnants I didn't want lol. Very fun build! Still needs plenty of tuning. So glad I took on the challenge :)

Here my make of The 100,
It was a fun project and I invested a lot of time into it. The learning curve is very steep, and I learned a lot about assembling and tuning 3dprinters (which was the intention ;-)). Chapeau to Matt, it is no easy task developing something like this.In the end I could achieve a 05:36 benchy, which is I think the maximum on my machine. (edited)

We did the 100 v1.1 high speed edition. Still tuning but just did a 14:02 benchy. Thanks to Matt and everyone answering questions on the discord. Lots of fun! 

Special thanks to @ressu for the cool electronics cover and mounting solution. Makes for a nice clean install.

Here's my attempt! Was a great experience building this. Thanks Matt for designing such a great piece of kit!

The 100 on the fly...