Evangelion Seele Monolith (Rebuild)

This model is of Seele monolith 01 from the Evangelion Rebuild series, as depicted below.

Caution

This is a work in progress and may be hard to print around the Seele logo at the top. You will need a small nozzle, 0.2mm ideally. Please review everything in the slicer up close. Scaling the model to its maximum possible size on your printer with your slicer will help.

There is a pre-painted model available for Bambu Studio also. It has been painted however the rest (everything else) is on you to configure.

Helpful Information

The only thing missing from this model from the rebuild series is the creepy white logo on the back. May have a stab at this later, however if you closely inspect it from the films, you can will see it will be “fun” to add accurately, with its chalk like appearance.

It is not possible to see the graphics on the front of the monolith in the viewer on Printables, you will need to grab the model to see it, or use the Shapr3D viewer for this model I have made available here which directly works in a browser and with optional AR.

I may add other monoliths in the future to complete the set - also thinking to add a version where it is possible to mount an LED light inside. This may take a while, or just not happen depending on time!

新世紀エヴァンゲリオン