Euthia - Complete Storage Solution (Insert) (Original KS)

Euthia - Complete Storage Solution (Insert) (Original KS)
15
165
0
1548
updated March 25, 2024

Description

PDF

17.1.2024

Replaced “Cards - Monsters” with version 2. 
In v1 was wrong card height in 6 compartments, now it is fixed in V2, sorry for that. 


Cards - Monsters V2

----------------------------

5.9.2023

Uploaded missing Player tray + lid (sorry for that)

----------------------------

Hi everyone, i have just created Insert for Euthia (Original KS - no expansion), because i could not find one, that i would like. So i created mine.

It uses the original box for miniatures and fits Elemental standee expansion with Griffin.

I tried to make it functional. The towers are made just to take out and ready to use. Same for the Silver/Gold cards, which are made as 2 layers. The Holder for monster cards has cutout made so, that you can read the reward text. The map tiles are not standing on the sharp edge. etc

With all the rest stuff in the box (player board, rules etc.) there is about 7cm free space to the top.

I am using thin sleeves.

I have used parametric The-Boardgame-Insert-Toolkit

 

Everything has to be printed 1x  except:

Map Tile - II a V.stl  - 2x (plus lid)

Map Tile - III a IV.stl - 2x (plus lid)

Players.stl - 6x (plus lid)


My print setup in Prusa Slicer
Nozzle - 6mm

Layers and perimeters:  
Solid Layers - Top = 0; Bottom = 0
Perimeters - 3
Seam position - Aligned
Perimeter generator - Arachne

Infill
Fill density - 45%
Fill pattern - Adaptive Cubic

 

Tags



Model origin

The author marked this model as their own original creation.

License