Arris VIP5202 (2021 KPN decoder Set-top box) wall mount

A wall mount for the Arris VIP5202 set-top box, known as the former (2021) set-top box of KPN, (4K version, not sure if this matters).

Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws.

The wall-side is made pretty beefy (18mm thick), but this fits my personal setup with the screws i had.

I've added a slotted vent pattern, to give it some air.
The set-top box should fit snuggly.

The backside has openings for the power cable, enthernet cable and the HDMI cable. Designed for my personal setup, if the SPDIF and/or USB port need to accessed, the grips on the backside needs to be (re-)moved.

First ever design, please be gentle.

Pictures ripped from my Thingiverse upload, couldn't find the originals, hence why they are blurry.

Printing orientation: standing up on the backside. (with the side where the connecters would go to the printbed)