Colt 1877 lightning rubber band gun for simple mechanism

• 3D MODEL DESCRIPTION

          Hi, this is the rubber band gun that 3D printable as based on Colt 1877 lightning.

• WARNING: this model is just a toy replica gun that can shoot elastic rubber bands. It doesn't have a real firing mechanism or real firearms technology on it. just for shooting harmless elastic rubber bands that can be able as an realistic. and also the single action are little bit weaker to hold hammer. it might be can able to misfire

• the original idea from "RBguns"s colt SAA rubber band gun with added double action. 

• it uses 12 size ( 40 mm / 1.4 mm) elastic rubber bands for shooting.

• Materials needed for assembly:
  3mm nails and screws with nut
  2.2mm Square Bar (round)
  super glue
  Springs:
  -- Wire diameter: 0.4 mm
  -- Outer diameter: 4.20 mm
  -- Inner diameter: 3.40 mm
  -- Free length (length) 26.0 mm

• There are no parts file Orange Tip. sorry.

I hope you will enjoy using my rubber band guns!

• 3D PRINTING SETTINGS
• Print space: 330 x 330 x 400 mm needed.
• Printer: tronxy X5SA 330 x 330 x 400 mm
  This is the printer I used and recommend, will work with any of the same dimensions (or bigger)
• Supports: yes