A moai generated on Midjourney - https://midjourney.com
And “painted" with HueForge Software. No MMU or AMS required. This was printed on an Prusa Mini.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sliceworx Onyx Black Transmission Distance: 0.5
PLA Sliceworx Engineers Grey Transmission Distance: 5
PLA Prusament Azure Blue Transmission Distance: 5
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Onyx Black until layer #5 at 0.48mm
Engineers Grey until layer #12 at 1.04mm
Azure Blue until layer #15 at 1.28mm
White for the rest.
The author marked this model as their own original creation.