Mandalorian figure STAR WARS + Grogu

I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature set depending on the filament, a lower speed and appropriately set retraction and z-hop

Print Settings Mando/Grogu

Printer:

Any

Rafts:

Yes 2mm/No

Supports:

No/Yes

Filament brand:

Any (my Aurapol)

Filament color:

Grey

Filament material:

PLA

Notes:

0.24/0.2 mm first layer

0.2/ 0.12mm layer
0.4mm nozzle
2 perimeter
150/45 mm height
0 infill

1mm retraction 

0.4 Z-hop 

50/40 perimeters speed

215C temp for first layer

198C temperature hotend