ESP32 (wroom32) + Level Shifter Box for WLED, Neopixel

This is a small box to hold an ESP32-Wroom32 micro controller, a level shifter and a female power plug. It uses M2 screws. Can be printed without any supports.

Used Parts:

These are just examples, not recommendations. The parts are similar to those I got.

• Level Shifter: https://www.amazon.de/s?k=B082F6BSB5
• DC Plug (female): https://www.amazon.de/s?k=B019HAC6V4
• ESP32: https://www.amazon.de/s?k=B08BZGC22Q (exact model)
• M2 Screws 8 to 12 mm
• wires plus a bunch of JST-XH connectors, but of course you can use anything

Wiring:

From the plug:

+ goes to “VIN” on the ESPm, “HV” on the level shifter, and to VIN on your neopixels
- goes to …

aargh, if you're here, you're smart enough for that. Anyway, I added pictures of the wiring.

Have fun!