Articulated Lobster

Lobster!

Print in place, with no supports needed.

Work in progress, feedback appreciated :)

March 5, 2024: version 5 is complete!

There are two different editions.

• V5-A has much freer leg joints, so that it can be handled more roughly and is more like a toy.
• V5-B has more fragile jointed legs intended more as desktop décor. The joints are stiffer and hold the lobster's shape better. This allows the lobster to be able to stand on its own.

For optimal print results:

• PLA
• 15% infill,  layer height of 0.2mm.
• No supports
• Do not scale down.
• Please wait until print bed is completely cooled before removing carefully.

Pictured above: v5-A (Moveable Claws)

Happy printing!