After my daughters phone case cracked, I decided to make one for her. And as she likes cats I made one with a lot of cute cats. There are models for a case with a plain back and two for the case with the cats. The ‘positive’ one has the cats and the ‘negative’ one the case minus the cats. The case with the cats can be printed on a single extruder printer by going to the ‘Printer Settings’ tab in PrusaSlicer in expert mode and changing ‘Extruders’ to 2 and checking ‘Single Extruder Multi Material’. See below:
Then in the main window add both STL (the positive and negative) at the same time. PrusaSlicer will then ask if it should consider it a two colour model. Choose yes and you are set to go.
You have to be carefull when inserting the phone to not put too much stress on the phone case. The fit is tight. First insert the top of the phone and then one by one both bottom corners.
Enjoy!
The author marked this model as their own original creation.