"Battle of the Planets" Phoenix ship "Comando-G"

The Phoenix ship from 70´s japanese anime series "Gatchaman" or "Battle of the Planets" or "Comando-G" acording to each country.

I have tried to simplify the design of the pieces to facilitate their printing and assembly.

¡¡The video of the assembly!!

I hope you like it as much as I do and that you enjoy its printing and assembly.

Recommeded filament: Fillamentum Noble Blue, Pearl Ruby Red, Rapunzel Silver, Vertigo Grey, Traffic Black and Traffic Yellow.

Print instructions

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Yes

Supports:

Yes

0.2

First I will indicate the general print settings and then detail them for each STL file.</p> Nozzle: 0.4 mm

Layer Height: 0.15/0.2/0.25 mm
Line Width: 0.35 mm

Wall Line Count: 3
Z Seam Alignment: User especified to place it so that it´s hidden.

Infill Density: 15%

Infill Speed: 60 mm/s
Outer Wall Speed: 25mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 25mm/s

Support: According to stl file
Support Over Hang Angle: According to stl file.
Support Density: 15%
Support Interface Thickness: 0.6 mm
Support Interface Density: 50%

Printable STL files:

• G_Phoenix_body_blue: Aprox.Time:11 h 30 min. Material: 124 gr.
Layer Height: 0.2 mm
Outer before inner walls: Desactivate Support: Yes
Support Over Hang Angle: 78º
Raft: YES
Recommended filament: Fillamentum Noble Blue.

•G_Phoenix_blue_pieces: Aprox.Time: 2 h 30 min. Material: 14 gr.
Layer Height: 0.15 mm
Support: Yes
Support Over Hang Angle: 80º
Raft: NO
Recommended filament: Fillamentum
Noble Blue.

•G_Phoenix_black_pieces: Aprox.Time: 31 min. Material: 3 gr.
Layer Height: 0.15 mm
Support: NO
Raft: NO
Recommended filament: Fillamentum Traficc Black.

•G_Phoenix_grey_pieces: Aprox.Time: 21 min. Material: 2 gr.
Layer Height: 0.15 mm
Support: NO
Raft: NO
Recommended filament: Fillamentum Vertigo Grey.

•G_Phoenix_red_pieces: Aprox.Time: 3 h. 30 min. Material: 21 gr.
Layer Height: 0.15 mm
Support: Yes
Support Over Hang Angle: 80º
Raft: NO
Recommended filament: Fillamentum Pearl Ruby Red.

•G_Phoenix_silver_pieces: Aprox.Time: 3 h. Material: 18 gr.
Layer Height: 0.15 mm
Support: Yes
Support Over Hang Angle: 80º
Raft: NO
Recommended filament: Fillamentum Rapunzel Silver.

•G_Phoenix_wings_red_blue: Aprox.Time: 1 h. 30 min. Material: 30 gr.
Layer Height: 0.2mm
Support: Yes
Support Over Hang Angle: 82º
Raft: NO
Change colour. Pause at height/layer (layer height: 0.2): layer 12.
Recommended filament: Fillamentum Pearl Ruby Red and Noble Blue.

•G_Phoenix_support_A: Aprox.Time: 1 h 30min. Material: 18 gr.
Layer Height: 0.25 mm
Support: Yes
Support Over Hang Angle: 80º
Raft: NO
Recommended filament: Fillamentum Traffic Black.

•G_Phoenix_support_B: Aprox.Time: 1 h 30min. Material: 18 gr.
Layer Height: 0.25 mm
Support: NO
Raft: NO
Change colour. Pause at height/layer (layer height: 0.25): layer 40, 42, 44.
Recommended filament: Fillamentum Traffic Black, Traffic Yellow and Pearl Ruby Red.