Electric guitar Fender Stratocaster FULL SIZE

I ran against time to also present this other project: my Fender Stratocaster Squire from the 90's; a  iconic, evergreen guitar.

I hope you enjoy printing and assembling it; above all I hope it can be printed and assembled well , since I can't show you a print. On paper everything seems ok, however always keep sandpaper etc. with you to ease assembling.

 For other recommendations and tricks, I invite you to read the  ones in my other project  in this  contest, about the YAMAHA acoustic guitar.

 I won't waste any more time and I wish you good work, fun and sound. I hope to receive some  good feedback and photos from you.

 Print using parameters according to your experience. Be aware of reinforcing the infill and  walls where  screws are needed. Use appropriate screw inserts.

Reference for body parts:

  Reference for  connection plugs :

I think the most delicate part to assemble is the neck, due to the forces it is subjected to. Obviously you can choose to install the original wooden neck.

Choose suitable bolts for the threated rod in the head side…

The threaded rod in the body must not protrude too much

Diameter of theated rod 6mm. Lenght ≥497mm