Voron 2.4 / trident 9mm belt gantry
u'll need to think 8-10mm longer on every bolt.
been using this on my 8 machines for a year now…time to share
you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print head you will need 4 f695 too.
right motor is upside of motor mount so no cable chains can be used, had umbilical/canbus in mind designing this. plus less strain on the motor shaft with the pulley closer to motor body.
240329
now also tested with archtype core
240203
not maintaining stls anymore
231002
fixed trident front idlers hole spacing.
230917
cleaned up some more
made some holes bridgable
fixed xy joints lower 30mm bolts bottomed out in extrusion.
thanks @johan/alucardi on discord for noticing.
(only stepfile updated, not stls)
230914
added trident A/B drives and front idlers
230911
fixed some alignment issues and cleaned up some models.
also uploaded the right step file….doh
added xol carriage
added bfi idlers
added dragonburner carriage
credits to
www.vorondesign.com
https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers/Voron%202.4
https://github.com/Armchair-Engineering/Xol-Toolhead
https://github.com/clee/VoronBFI
https://github.com/mandryd/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015
https://github.com/chirpy2605/voron/tree/main/general/Large_Voron_Mounts
The author remixed this model.
9mm belts