led lamp
using led strips 0.3x0.05, 6in long, requres 8 strips, 2 in each leg
print slower at higher levels
base has mount for usb boost modules like these, set to 12v or led strip voltage
https://www.amazon.com/SDTC-Tech-Converter-Adjustable-Regulator/dp/B07NRLG7ZV/
modified model works strips slide in without much trouble, tap sides to help them in, be sure to cut flatten led strips and squish out bubbles in the strip tape/backing so it goes in easily
12v strips will draw about 1a, usb boost board will need 5v 2a usb power supply, but at 10v it draws about 0.5a from usb and still gives a good lamp glow
The author marked this model as their own original creation.