JobOx automation system was initially designed for use with Prusa MK3s printers.
This adapter kit allows you using it on Prusa MK4 printer as well.
Please note: not yet tested on MK3.5/MK3.9 upgrade kits.
All parts can be printed without support. Some parts contains pre-constructed bases for better adhesion to printing bed. These can be removed easily. PETG usage is recommended.
For assembling no tools are needed. Please follow the assembling guidance and instructions on www.jobox.app/mk4.
Update 10.05.2023 - V02: Spacer part of the magazine was adjusted from 2.5mm to 2.0mm.
Update 15.05.2023 - V03: Spacer part for magazine bridge was added. Spacer part for the magazine feet was removed (the leveling of the bridge seems to compensate for the difference in height between MK3 and MK4).
Update 21.05.2023 - v04: Added spacer for the side parts in order to prevent collision with the heat bad connector. Spacer part for the magazine has been slightly downsized (from 1.4mm to 1.2mm).
Update 16.06.2023 - v05: Spacer part for the magazine has been slightly downsized (from 1.2mm to 1.0mm). Spacer part for the magazine feet was added (back again :-) ) Please use the latest MK4 profile for Prusa slicer (see guidance link above).
Update 02.08.2023 - v06: Added 2 additional spacer for the side parts in order to prevent collision with the slightly higher heat bad connector. You can download this part separately and print 2 times (it's symmetrical).
Update 29.10.2023 - v07: Magazine bridge spacer was removed. Original magazine feet needs to be replaced completely instead. New magazine feet provided with this adapter kit will bring your magazine slightly closer to the printer.
Update 23.04.2024 - v08: Added an optional part needed when using JobOx with optional rails.
The author marked this model as their own original creation.