Courner Router Template, able to do multiple sizes (metric & Imperial)

This is a print of a tool i used to use and really miss in my current workshop. I therefore did a printed version.

Comprises of a base plate and a handle. 2 Base plates are included, one metric with supports for R5, R10, R15 & R20. One imperial covering 1/8, ¼, ¾ and 1'

Please note I have not yet used this on a Router table as I have designed this for an upcoming project. Please treat this as ‘Draft’ and not fully tested. If the design needs improving please leave comments and i will attempt to resolve them. I have allowed for a slight tolerance for fitment but it may need a little post processing. 

Recomended to print in a heat resistant meterail such as ABS or PETG although PLA will work as well.  Infill should be set high (around 35%) to provide some strength especially to the handle. I have tried to avoid overhangs therefore should not need supports to print.