Hi !
I'm the lucky owner of one of the most powerful and multipurpose battery charger, an ISDT C4
This charger can handle almost any kind of battery chemical....Li-ion ni-mh,ni-cd,ni-Zn,..
14 kind of battery format 18650,26850,AA... but unfortunatly he does'nt handle D cell type.
I own some devices using D cell type because high capacity of these cells (+-6000maH)
I designed this simple adapter in order to adapt the D cell type to my charger.
No tricky soldering needed.
You need for the AA adapter side
2 screws M3x6mm
2 nuts M3
2 washers
And for the D adapter side
2 screws M3x6mm
2 nuts M3
2 washers
2 small wires you must arrange around the washer as it's show on the picture.
Happy Printing !
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
30%
Filament: any any any
Category: Electronics
The author marked this model as their own original creation. Imported from Thingiverse.