Update 23/09/2023
- Added 2 sizes of holders for 30mm test cubes
Update 22/09/2023 pm
- 21 sizes of “Ez-H2 Cylinder” added - 10mm to 50mm in increments of 2mm
Update 22/09/2023
- Launch of the Ez-H system with 6 fittings
- To be added: a variety of sizes of generic holders based on feedback and base files for remixing
---------------
A new attachment standard for the popular Honeycomb Storage Wall.
- Easy to print - easy overhangs and no supports
- Single piece tool holders - no need for separate adapters
- Locking pin - extra security for heavier objects (optional)
- Print holders upright - layer orientation optimised
Print setting recommendations:
- Material: PLA, ABS, ASA (PETG will be a little less secure due to the reduced stiffness but should be workable with locking pins)
- 0.4mm nozzle, 0.25mm all layer heights
- 2 walls, 30% grid infill
Enjoy!
If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.
Tags
The author remixed this model.
Differences of the remix compared to the original
Brand new models with a new clip design to be compatible with the Honeycomb Storage Wall