the privded mounting solutions from beacon3d requires replacing the x carriage.
I remixed the klicky probe mount by jlas1 to allow mounting the beacon scanner without replacing the x carriage just replace the probe mount.
Used the recomended beacon3d supplied cad for clearance as shown in the images.
requires changing the beacon offsets in the printer.cfg to the following values.
[beacon]
serial: /dev/serial/by-id/usb-Beacon_Beacon_RevD_V<..addyourserial..>-if00
x_offset: 0 # update with offset from nozzle on your machine
y_offset: 28.119 # update with offset from nozzle on your machine
mesh_main_direction: x
mesh_runs: 2
The author remixed this model.