Nvidia Tesla P40/100 Fan Shroud For 120mm Blower (Full/Mid Tower)

A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA,  etc. PWM controller makes the fan basically silent in a full tower case.

Use Small M2 Screws, Print without supports preferably in PETG.

PWM Controllers:

https://www.amazon.com/dp/B08HGNDCTN

Fan:

https://www.amazon.com/dp/B08P1S5DBN