EVA 3 Beacon Probe Default / HF Ducts

EVA 3 Ducts with a mount for Beacon Probe. Same as the "default" ducts on the EVA page.
37
373
2
2606
updated March 22, 2023

Description

PDF

You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board.

This uses 3.8mm heat-set inserts to mount Beacon 

US source: https://www.mcmaster.com/94180A331/

You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint!

:)

Tags



Model origin

The author remixed this model.

License