Inserts vor Voron 2.4 Ultralight CNC X-Axis
I found some inserts made by nagelwerkstatt and printed these to find out that the Voron 0.1 uses 15x15 extrusions. So I designed something similar for a 20x20 extrusion.
Use three M5 heat inserts per part
Ali link for extralight extrusion (the heat inserts were included)
I used the Voron preferences for printing
0.4 Nozzle
4 walls with 0.4 line width
5 layers at top and bottom
40% infill with gyroid pattern
The author marked this model as their own original creation.