Frame for 2.9" E-Paper WaveShare display module

Box for 2.9" E-Paper display module from WaveShare
7
134
0
675
updated May 26, 2023

Description

PDF

Wall mount case for 2.9" E-Paper display module from WaveShare. Case designed on wall and other surfaces which possible wiring through the surface. It's precission window over the display area of the module.

You have not other mounting material, the clips are included in the center of the model. Included? why? because the clips are too small for colding in the process of the printing and its not possible printing it separately. They are will be deformed in progress of the print process separately.

In my case was printed from waste PLA attatched in the 3D printer package.

There was lot of printed pieces before I publish it. System of case is allow mount all or two screws and then click it into bottom case on the wall. It's hard connection between back cover and front cover of the display.

Tags



Model origin

The author marked this model as their own original creation.

License