ESP32 Rig Rack & Cube Case for Duino-Coin

This is the second version of the ESP32 Rig Rack.
Designed for ESP32 board without any pins attached for slim fit

It consists of Four (4) Rack Sleeves that fit into a Single Fan box with a 120mm fan attached to it. 

• Each sleeve has an extension plate for a proto board.
• Guide rails are not covering VIN or GND pins holes on board
• stopper so that board does not slide out the end. 

The 120mm Fan Box is for the sleeve to fit in. 

• 77 mm depth for expansion
• 120mm Internal Dimensions
• 125mm External
• 2.0mm walls. 

I have to print the box today and will upload photos with my progress.

To Do: 
Wiring Design and Lid/exaust cover for Fan Box.