Update Dezember 2023:
I got a lot of requests of people who don't like to use Fusion360 so I added .stl files for bins from 1x1 to 7x7. Each size is available in 3U, 4U, 5U and 6U heights. And all files are available for 6x2mm and 6x3mm magnets.
If you still want to have a different size bin there are instructions how to use the parametric Fusion360 file below. You just need to scroll down ;)
To find the right size the files are named as follows: depth x width x height
----------------------------------------------------------------------------------------------------------------
This is a remix of the original bins by Zack Freedman that you can find here: https://bit.ly/ZFGridfinityDividerBins
Outer dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity system.
For my bins I use the following settings:
The original parametric fusion360 file that Zack created did not work for me for bigger bins. I got errors and the final bin consisted of several objects. After hours of searching for the reason I found out that this is a bug/missing feature in fusion360. Fusion360 can only combine as many objects as were existing during the initial creation. The original file seems to be created with a 1x3 bin. That means there are problems for all bigger bins. So I re-created the fusion360 file with a bin size of 10x10. This means you will be able to create bins from 1x1 to 10x10 without errors. I decided to have the same parameters as in the original file to make it easy for users of the existing file from Zack to use this.
The following parameters can be changes within the given value ranges without causing problems with the provided fusion360 file.
Note that you not only can add nubmers, but also fractions as parameters. This is useful for the slotsHigh parameter. In the original fusion360 file slotHigh “1” creates a 6U high bin. So if you want to easily have a bin with a specific gridfinity xU hight, you can just put in x/6 as the parameter.
Changing other parameters than in the table below might work, but I did not test it.
Fusion360 might need a while when you go for huge bins.
Parameter | Value | Description |
slotsWide | 1-10 | width of the bin |
slotsDeep | 1-10 | depth of the bin |
slotsHigh | 3/6 - 10/6 | height of the bin |
magnetThiccness | 2.4 - 3.4 | 2.4 for 6x2mm magnets 3.4 for 6x3mm magnets |
If you do not want magnet holes on the bottom of the bin there is an easy way to remove them:
Set the parameters screwTightDiameter and magnetDiameter to 0.01. This will not cause errors in the parametric file and make the holes so small your slicer will not recognize the holes any more.
The file will give you a warning for bins with a size less than 10x10. This is normal and expected.
The author remixed this model.