Voron 0.2 V0.2 Side Skirt One Piece

This is a combination of the Voron V0.2's two-pieced side skirt. Not printable on a V0!
82
886
16
2502
updated February 17, 2023

Description

PDF

If you don't want to print your skirts on the V0 itself and have a bigger printer at hand, you can print this one-piece side skirt.

It comes in two variations:

  • the regular one is just like the original skirt pieces “open”
  • the “closed” variant has a 0.6mm bottom layer that is intended to be printed with a higher infill and no top and bottom layers.

When chosing the “closed” version, make sure you add a height range modifier at 0.6mm. Up to this height there should be no top and no bottom layers to allow airflow. (See attached screenshot.) Choose whatever your heart desires as infill and see what infill density looks the best to you :)

You may also add a color change “M600” right above 0.6mm (i.e. at 0.8mm height if you print with 0.2mm layers) to spice things up a bit. 

---

Please share a Make if you print one of these and as always: Enjoy!

Tags



Model origin

The author remixed this model.

License