None of the existing filament guides I found were quite what I needed so I created this one. Top and bottom ball bearings support the filament from any direction.
Two options are provided for the ball bearing bracket as I wanted to integrate a PC4-M6 connector to run a bowden tube from my filament dryer.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
You will need (2) 608ZZ ball bearings and (2) M4 x 25mm screws for assembly.
The author marked this model as their own original creation. Imported from Thingiverse.