Dice Tower v1

Don't forget to check out the other models:

• Version #1 (this model)
• Version #2
• Version #3

Printing in action...

• Courtyard: https://youtu.be/A3njc5YjtOk
• Rock Base: https://youtu.be/LToivxAgDOk 
• Dragon: https://youtu.be/kDhfvlJEV4U 
• Tower: https://youtu.be/ubb9neuKDNc 
• Assembled: https://youtu.be/X75dLy0laT0 
• Full Playlist: https://www.youtube.com/playlist?list=PLlAGQ1IzxgP7R062weIiwV0GPpjuYX4a_ 

This is a remix of a project found elsewhere on the web.

The original would not fit on my Ender 5, so I sliced off the dragon, separated the rock formations, and then cut the rock formation in 1/2, creating the base and the courtyard. This way, all four prices can be printed individually and, in my case, with different filaments.

This was just a stepping stone to my design, so that I won't be putting any more work into this model. For my version, see https://www.thingiverse.com/thing:4608793

Originally I only printed the tower and dragon. I eventually printed the rock base to give it to a friend instead of throwing the prototype away. To get the tower and the rock base to come together, I had to do a great deal of sanding - there was no clearance.

Because of the difficulty of combining the tower and rock base back together after printing, I added an optional STL file where the two are recombined.

I used supports on the dragon.

I did not use supports on any of the other pieces

Derivative Licenses:

• My source model can be found at https://www.thingiverse.com/thing:4581634 and employs the Creative Commons - Attribution license.
• The original tower can be found at https://www.thingiverse.com/thing:3433643 and employs the BSD License
• The dragon can be found at https://www.thingiverse.com/thing:4205078 and employs the Creative Commons - Attribution license.
• The original dragon can be found at https://www.thingiverse.com/thing:2719531 and employs the Creative Commons - Public Domain Dedication