Printed in Prusament Clear PETG, which worked out great!
Remixed the back panel to fit around the Pimoroni Hyperpixel 4.0 display, which also worked out great. Modularity for the win!
Only oddity was getting the camera ribbon cable to fit right but that was easily taken care of by threading the FPC around the board by the SD socket. There was just enough room there between the side of the SD card and the standoff on the corner for the Hyperpixel. From there it was just a simple matter of folding it a bit to squeeze in the ample room in the front case behind the HQ cam.
Printed in Prusament Clear PETG, which worked out great!
Remixed the back panel to fit around the Pimoroni Hyperpixel 4.0 display, which also worked out great. Modularity for the win!
Only oddity was getting the camera ribbon cable to fit right but that was easily taken care of by threading the FPC around the board by the SD socket. There was just enough room there between the side of the SD card and the standoff on the corner for the Hyperpixel. From there it was just a simple matter of folding it a bit to squeeze in the ample room in the front case behind the HQ cam.
Thanks for a great model!
Remix with case back is available here:
https://www.printables.com/model/216960-raspberry-pi-hq-camera-case-hyperpixel-style (edited)