#0042 Display Stand - 3 sizes

I wanted to display some artwork from my daughter (10yrs old) in my office and couldn't find any models on Printables for what I needed, so I designed my own. 

These particular items I have happen to be painted rocks, but you can use it to display anything you'd like.

Three sizes are provided, each at 2 different lean angles of the spine, 8° and 15°.

The 15° version is meant for desktop height, and the 8° version is more upright and intended for items more around eye-level.

Due to the lean angle, the 15° version tends to accommodate smaller items before tipping backward.  Naturally, the 8° version can accommodate a bit larger items.

For Items Displayed at Desk-Level:

For Items Displayed Around Eye-Level:

Note: 2 orientations to print the stands are shown.

Print Recommendations:

1. PLA is a good option for this model
2. 0.2mm layer height, 2 walls
3. No supports needed

Tip: For best print quality, avoid placing seams on overhang edges or faces.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!