Extension for the top of the poop chute door to help with filament not getting stuck on the top of the door.
it just pushes on top of the door , flat side to the front.
I was always having problems with the long oozed strand of filament in between color changes before the main push that makes the pellet and alot of the times the long strand would hang up over the top of the poop chute door hinge .
So i made this to try and printed it in Poly Maker PC and to help filament not sticking in the top of the chute i also rubbed a small drop of oil on the door and chute so filament should not stick at all . so far it has been working far better then it was for me and just figured id share if it helps someone else.
At a minimum id print it in PETG or ASA if you print with higher temp filaments .
I have printed this in PLA also and it has been working great while just printing with pla .
The author marked this model as their own original creation.