Caddy with Print-In-Place Handle | 4 Compartments

Caddy With Handle (Print-In-Place)

No additional hardware, tools, or assembly required!!

Print-In-Place Instructions

After printing, press in on the handle (not the circle) on both sides where the handle attaches to the caddy, you should hear a click. This will loosen the print-in-place connection. Move the handle back and forth to smooth out motion. Caution: Moving the handle before pushing in may cause damage to the connector.

Printing Instructions

DO NOT RESIZE - It will mess up the print-in-place functionality. I have provided 3 different sizes to fit the majority of print beds. If you see something missing (or you like the model!), leave a comment and I will add it to fit your needs as long as it is reasonable, there is a limit on how small it can get.

0.2mm or 0.3mm layer height, make sure you use the right model.

Lightning infill for faster print, gyroid for more sturdy. 15% was good enough.

Follow Us!

Like the model if you enjoy it and follow us here on Printables.com to keep up with our regularly published models.

YouTube: https://www.youtube.com/@spooldesigns
Instagram: https://instagram.com/spooldesigns