This is a lathe chuck work stop (spider), for chucking very short parts near the chuck jaw tips. It is designed for jaws that are 1" wide, and 1.75 deep. This one is 1.25 high, which allows 1/2" of jaw to engage the part. Print using PLA/ABS/PETG, no supports needed.
It has 3 slightly undersized holes in the bottom to allow you to epoxy/press in 12mm x 6mm neodymium magnets.
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
No
Resolution:
0.16
Infill:
25%
Filament: Polymaker Polyflex TPU Black
Category: 3D PrintingThe author marked this model as their own original creation. Imported from Thingiverse.