Promethean Air Cleaner for FDM and MSLA (resin)

This air cleaner is designed for FDM & Resin, uses a reusable carbon cartridge, and is available as DIY or Assembled.
39h 42m
10× print file
0.16 mm
0.15 mm
0.40 mm
496.00 g
24
131
1
1037
updated June 6, 2023

Description

PDF

Highlights:

  • MERV 13 filter maintains a good airflow rate while capturing the majority of particulates.
  • HEPA 13 is available for extraction applications.
  • Reusable cartridge uses low-dust coconut-shell activated carbon.
  • Can be used as a typical air cleaner or a fume extractor (from a grow tent or other enclosure).
  • Compatible with other 120 mm fans and 6 inch (150mm) filters.

 

We recommend downloading the zip file to get an organized directory.

Visit https://4dfiltration.com/resources/promethean-guide.html for the entire build guide and a component selection table.

 

 

This unit is in no way a replacement for proper ventilation that is HIGHLY recommended in any resin setup - it is supplemental to a setup by assisting to contain 'fumes' at the source.

This air cleaner pulls air through a MERV 13 filter and activated carbon granules. The MERV 13 filter is ideal for capturing nanoplastics generated from FDM printers. The activated carbon mitigates fumes from FDM and resin printers - place emphasis on mitigation since carbon typically has efficiencies of 40-60%

The Promethean files are released for non-commercial use (don't make and sell these) and a sourcing & build guide is provided below. If you wish to purchase a pre-assembled version or pick up some of the components, head over to our Shop.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more