This is a remix of the excellent enclosure for DIY "The Things Network" LoraWan gateway created by Amedee.
Instead of the coredump.ch backplane which is used to connect the IMST iC880a Concentrator to the Raspberry Pi in the original DIY TTN Gateway I'm using the ch2i backplane which has a different form factor.
Thus I had to modify the bottom part of the enclosure as well as the front panel so that the Raspberry Pi is moved to the middle of the enclosure. Also the openings for the Fan and for the DC Power Connector were removed as they are not needed in my case. I added an additional opening in the bottom part of the enclosure to allow for the connection of a Micro USB cable as a power source for the Raspberry Pi.
Printer Brand:
Prusa
Printer:
i3 MK2 MMU
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Grid 20%
Notes:
Printed using PrimaSelect PETG (transparent blue).
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.