"Turtle" mITX SFF Case

This case is meant to be used with a picoPSU or any clone of it.

It features an 8mm hole on the back for the power input port of the picoPSU, as well as a 12mm hole for a vandal power switch.

It also features VESA-75 and VESA-100 mounting holes so that you can mount it on the back of your monitor for a more compact system

Components required:

• 8 countersunk M3x6 screws (motherboard & top)
• 4 countersunk M3x9 screws (feet)
• 4 6mm motherboard standoffs
• 1 12mm vandal power switch
• 1 picoPSU of your required wattage