Display Mounting Bracket - Fusion 360

This is a corner bracket for mounting the SmartiPi Touch 2 monitor enclosure housing the Raspberry Pi Official 7" Touch Screen. These parts were chosen because I had them on-hand from previous projects and wanted to use them on my Railcore II 3D printer. The bracket might also work for other applications or similar printers. Bracket mounting holes are M4 clearance and monitor mounting holes are M4 tapped (modeled threads).

The SmartiPi housing is designed to include the Raspberry Pi, but my Pi is mounted inside the electronics enclosure on the printer side panel. All I needed was a longer ribbon cable to make it work. Power for the monitor comes from a stand-alone Mean Well 5V supply, also mounted inside the electronics enclosure.

Designed in Fusion 360 with f3d and step files included.

Raspberry Pi Official 7" Touch Screen - https://www.amazon.com/Raspberry-Pi-Official-Touch-Screen/dp/B073S3LQ6Q/ref=sr_1_3

SmartiPi Touch 2 Display Enclosure - https://www.amazon.com/SmartiPi-Touch-Official-Raspberry-Touchscreen/dp/B07WXK38YM/ref=sr_1_1_sspa

Mean-Well 5V Power Supply - https://www.amazon.com/MEAN-WELL-LRS-100-5-Switching-Enclosed/dp/B07DKCMJN9/ref=sr_1_1_sspa

Print Settings

Printer:

Railcore II 300XL

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

15%

Filament:

Black